Chestnut - products CNP225 Wood Finishing Cut'n'Polish 225ml

CHESTNUT PRODUCTS CNP225 Cut’n’Polish 225ml Cut n Polish is a blend of two waxes with a fine abrasive held in suspension within them. This is a soft wax designed to stay wet slightly longer during application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere. On bare wood; sand to 240 grit as normal, apply a coat of CutnPolish with the lathe stopped, then switch on the lathe and buff to a soft sheen whilst smoothing the timber at the same time. On sealed wood apply after the sealer in the same way, polishing to a slightly higher shine. CutnPolish dries almost immediately and can be overcoated with Friction Polish or any of our waxes for a higher shine.